$0F, by 1, with 1 retry and to drive two, then answer "N" for no
to this question.  If you answer "Y" for yes then Advanced
Demuffin will ask you:  "SECTORS PER TRACK? (13/16)"  The first
digit of has to be a 1.  You should then enter a "3" for a
thirteen sector disk (DOS 3.2) or a "6" for a sixteen sector disk
(DOS 3.3).  If you don't know if the disk has 13 or 16 sectors
try to convert it with 16 sectors, and if you get errors on all
sectors past sector "C", then it is most probably a 13 sector
disk.

All the option "SECTORS PER TRACK" does is tell Advanced Demuffin
at what sector to change to a new track.

Then Advanced Demuffin will ask you to enter the "START TRACK",
enter the track (normally $0) in hex.  You may enter half tracks,
just type a "." after you enter the track and Advanced Demuffin
will automatically tack a ".5" on the end of the track.

Then enter the start sector number in hex when Advanced Demuffin
prompts you to.

Advanced Demuffin will then ask you to enter the end track and
sector.

NOTE: The start track and sector must come before the end track
      and sector.  EX:

      Start track: $00         Start track: $22
      Start sector: $00        Start sector: $0F
      End track: $22           End track: $00
      End sector : $0F         End sector: $00

      This is fine.            But this is illegal. If you enter
                               it this way Advanced Demuffin
                               will give you the message:
                               "BACKWARDS COPYING NOT SUPPORTED!"

After entering the track and sectors, Advanced Demuffin will ask
you what increment what you want to go by. (Usually 1)   Anybody
that wants to change the increment (to anything other than one),
should already know what increment is, so I won't explain it.

You will then be asked "MAX # OF RETRIES?". You should then enter
the number of times (usually 1) you want Advanced Demuffin to try
to read/write a sector if it gets an error on it.

Then you should enter the drive to be copied to.
NOTE: The source drive must always be drive 1 because of
limitations of the IOB module.



If you specified two drives then Advanced Demuffin will prompt
you to:

"INSERT DISKS AND PRESS RETURN"

You should then insert the source in drive 1 and the target in
drive 2 and press RETURN.  Advanced Demuffin will the proceed to
convert the disk to DOS 3.3.

If you specified one drive, Advanced Demuffin will ask you to:

"INSERT SOURCE DISK AND PRESS RETURN"

You should then insert the source disk and press RETURN.
Advanced Demuffin will then read 7 tracks off source and ask you
to insert the target, you should then insert the target, Advanced
Demuffin will then write those 7 tracks. It will take 5 passes to
copy the whole disk.

After the disk is copied, Advanced Demuffin will display the
message "PRESS ANY KEY TO CONTINUE".  If you press 1-7 Advanced
Demuffin will then do a "screen dump to printer" in the slot of
the number that you pressed.  Any other key will return you to
the main menu.

The Display

ADVANCED DEMUFFIN 1.1  -  COPYRIGHT 1983
WRITTEN BY THE STACK - CORRUPT COMPUTING
========================================
TRK:
+.5:
    01234